Mountain bike riding is one of the “funnest” thing to do on a holiday especially. It could be very unpredictable too! To make your mountain bike day trips or evening rides run smoothly and keep you bouncing along the trails you need the right accessories. These accessories could really make your mountain bikes for big guys time worthwhile, as anything could really go wrong on those heights, and the last thing you would want is to get stranded amidst the fun, not knowing what to do or how to go about it.


Safety is always the first thing you should have in mind before embarking on mountain biking! Always take lights along, regardless of how bright the weather might seem the time you set out. Out on the trails and up in the hills, the weather can change quite immediately and without warning. This is when lights keep you safe not only for you to see your way, but also to keep you visible to others. How much fun biking can be, we never seem to want to stop, even when it is getting dark. Having a source of light can give you that extra time you crave. Don’t let it pass you by. These light sources can be mounted anywhere convenient on your bike, and most come with an emergency battery saving feature which would alert you, and now, you know it is really time to go home.


These can get you out of a mess in a hurry. They are fantastic to have on your bike ride. Whether you are tubeless or tubed, an inflator is a quick easy fix to repairing a flat tyre and a must carry on your bike ride.


Anything can go wrong when you are out on the trails. Your tyres could get punctures and your chains could snap. It’s life, right? It can happen at any time, anywhere. Your saddle bag should carry important tools you could use to fix the problem like a multitool, chain-link, innertube, chain tool. The saddle bag is awesome as it has plenty of room for storing all essentials. Some have the bonus of a built-in 17-piece tool kit. Some also have a rain cover the protect your tools from getting wet.


There is no worse feeling than getting your back wet. It’s cold and uncomfortable and can lead to soreness. And since you will really be riding on the muds, they will make way into your shorts. A mud guard would keep you dry and enjoy your ride even more. The quick release fastening helps in making it very convenient and quick to use.


It is very important to stay hydrated. Not only that, get prepared because biking can take the whole day. So, whether you are just nipping out for a spin or on the bike for the day, a hydration pack is necessary. A suggestion would be Camelbak for mountain biking.


Mountain biking is fun and could have a lot of mishaps too. Take the above 5, and you will be just fine. There are other accessories too, but these are the ones we deemed very important.

How to Climb and Descend on a Mountain Bike?

All the components of good technique come into play when climbing and descending hills on your hill mountain bikes for big guys. Here are some techniques to help you to get up and down the hill–not only unchanged, but also with style and sophistication.

Climbing Hills on the Mountain Bike

Body position: Keep yourself loose on the cycle, knees and elbows bent to help you remain responsive to the terrain.

Where to look: Keep eyes centered about 10 to 15 feet ahead of you on the path so that you see the upcoming ground changes and hurdles and make modifications as needed.  See more about the Hardtail mountain bike.

How to use your gears?                      

Choosing the correct gear for the path ahead of you can be challenging initially; remember to look forward and anticipate what you will encounter. If you are getting close a climb, shift to a less strenuous products as you strike the bottom of the climb. In the event that you visit a long downhill before you, move to a harder product. Rolling terrain is trickier, but with some practice you will be shifting without even thinking about it.

Descending Hills over a Mountain Bike

Couch position for descending: Descending is where in fact the fun commences and–for beginners–can be the most intimidating. First drop your seating, as you want a whole lot of clearance between your butt and the seat. This lets you respond to the varied landscape more easily, and helps you avoid getting bucked if you strike an unexpected bump and the chair comes slamming upward. Some Hardtail mountain bike come with a “dropper post” which allows you to adapt the seat height on the soar via a remote lever on the handlebars.

Body position for descending: Keep your body low to the bike and position yourself very well back so that your butt is almost suspended over the trunk, wheel; make sure you are not sitting down and that your knees are bent. Allowing the motorcycle take the brunt of the ground you encounter and also keeps your weight back again, reducing your possibility of exceeding the handlebars. See more.

How to braking system:

Braking should be regular and controlled; almost all of your braking vitality originates from your front brake but getting a handful of entrance brake will send you over the bars. Instead, gently apply the brakes, and do so evenly on leading and back brakes again. When getting close a flip, brake before you strike the turn, and then let your momentum take you through.

Improving Your Downhill Technique

Descending over boulders or drop-offs can be an advanced technique and really should be attempted only by experienced riders. If you’re experienced and sense confident, all the overall rules apply, except with greater emphasis:

  • Lean in the past, with the sofa behind your saddle.
  • Keep your elbows bent and body low.

Depend on both brakes, but largely on your rear brake, as you may want to release leading to provide more momentum.

Lastly, mountain Motorcycle Etiquette Includes, control your velocity, always produce right-of-way to cyclists visiting uphill. Always give a polite “on your left” whenever you go another cyclist. Always give right of way to horses, hikers and joggers. Check out this site: http://www.justmountainbike.com

How to Clean and Lubricate Your Mountain Bike Chain

If you are a cyclist or you own a mountain bike then you definitely need a mountain bike chain lubricant, you know how hard the chain rings works. Each time we press the pedal that pushes the engine forward, the chain always operates under high voltage. First of all, the chain is an important part of the bike.

Understand your bike chain

You must know that it will go on time. Since it is a mechanical component, you must maintain it. There are three parts of the chain, namely the inner plate, chain pin and the outer plate. The pin is responsible for fixing the inner and outer plates, creating a long chain. In addition to the movement of the front and rear movements, it also has lateral movements. This is also known as lateral movement. You need a link. After a long use, the chain is extended. The increased extension also increases lateral movement (which affects movement).

How to extend the life of the chain

Clean the chain regularly. Of course, it depends on where you bike. Cyclists usually need more time to pull the rope. Use a cleaning brush and water mixed with detergents (or a degreasing agent). Tighten the gears so that the chain has the largest sprocket (most sprockets). Place the brush on the bottom of the chain and slide it with your hands. In case of stubborn dirt, use a screwdriver.

However, you also need to make sure the sprocket the chain runs on is clean. Therefore, use a toothbrush to clean the teeth of the sprocket. After you are done with cleaning your chain and sprocket teeth, you should always dry them with a cloth or rag. This keeps moisture out. In most cases, the chain and sprocket is made from steel. Keeping the moisture out will prevent rust. Why it seems important that you consider taking adequate care of your bike chain is so it does do not disappoint you when you need it the most and there is high tendency that the chain life span will be elongated.

How and when you should lubricate your chain?

Lubrication is key. Lubrication can prevent rust and other dirt problems. But only lubricate a clean chain. There is no point in lubricating a dirty chain. At least, do a quick wipe before lubricating it, if you cannot afford a full cleaning session. Experienced riders like to lube their chain one night before heading out for rides. Position the lube on the inner side of the chain and pedal backwards slowly. Make sure each roller gets lubricated. During the next morning, you should wipe off any excess from the outer plates.


Generally, you would want to get a mountain bike chain lubricant. This is especially true if you need to use your bike for a very long duration or muddy conditions. As for dry lubricants, they tend to flake off with usage and do not stay as long as wet lubes. Therefore, dry lubes are only suitable for dusty environments. This is because dry lubes and dust do not mix together.

Finding the Best Mountain Bike Size for Your Safety and Comfort

Buying an inexpensive mountain bike can be what most newcomers do and it’s a good idea to say the least. An inexpensive bike is the best starting point as just in case you get bored, you haven’t wasted too much money. However, at the same time, you want to ensure the mountain bike you use is suitable for you in many ways. You want a bike that offers safety and comfort which can be tricky at times to find. Read on to find a few simple ways to help you find the right mountain bike size for you today.

Test the Bikes Out

First of all, you have to try a few mountain bikes on for size so that you get the measure of them. You are going to do a lot of testing simply because it’s one of the simplest ways to narrow down the search for a safe and comfortable bike! Mountain bikes for big guys need to suit your frame as well as be able to offer a comfortable ride. You really need to test out a few bikes to get an idea of what you’re looking for. Newcomers will find this to be absolutely ideal and a lot easier than it sounds too.

Measure the Size of Your Leg and Compare to the Bike’s Frame

While you may set your sights on an inexpensive mountain bike, your body might have other ideas. Now, it’s necessary to ensure you can get safely on and off the bike without overextending your leg or indeed knocking them against the bike. If you buy a bike that doesn’t offer safety in terms of dismounting it’s going to present a lot of issues. What’s more, you need to ensure it’s a comfortable bike so that you don’t have too much trouble cycling. It would be wise to measure the inside of your leg so that you can match it up to a frame that’s a suitable size. read their latest news at http://www.nsnews.com/lifestyle/health-wellness/local-trails-boast-big-mountain-rides-1.21199658

Don’t Settle For Less

bikingIn all honesty, when you choose a mountain bike that is a little too small for you, you are sure to have some trouble. Bikes which are too small or too large will be extremely difficult to become comfortable on and, even though it’s an expensive bike, it’s simply not right. A lot of newcomers settle for the first bike they see simply because they think all bikes are fine. Unfortunately, bikes are made differently. Some mountain bikes are ideal for those who are shorter and others which are ideal for those who are taller! What’s more, you cannot only focus on your height but also your girth! You have to find mountain bikes for big guys or ones that suit smaller frames. Too many people don’t and end up very uncomfortable! Read on to find out more!

Find the Perfect Bike

It has become a necessity to find a bike that offers you what you need and more. There are lots of mountain bikes available and you want one that is safe to ride and very comfortable. You have to take your time to find the one that fits your size and needs most of all. Why not start off with an inexpensive mountain bike and go from there?